Belt buckle production process

Interpretation of belt buckle production process. The curved structure of the high-strength belt buckle is achieved through a special folding stamping system. Special imported stainless steel material is used to ensure the strength, elasticity and toughness of the belt buckle. The button network Xiaobian will take everyone to look at:

First, electroplating. Plating is an essential part of every hardware category, such as belt buckle products.

1, from the type of plating is divided into: rolling, hanging electricity. Yanshi Longyu Machinery reminds everyone that rolling electrical products are used in products with low appearance requirements for hardware deduction products. Its electroplated metal products will not be very shiny and will have flower marks. Of course, the cost of electroplating is also low. The corns, the nails, the three-claw New Zealand, and the acute New Zealand bottom are generally rolled. Hanging electricity is used for products with high appearance requirements for hardware deduction products. For example, alloys are used for quick pressing, metal hardware pinning, and hardware chains are generally used for hanging electricity.

2, from the environmental aspects can be divided into: nickel plating, nickel-free plating. Electroplating transforms the color into a film by chemical treatment and attaches to the surface of the product. If nickel is infiltrated during the electroplating process, it will result in non-compliance with national environmental standards. For electroplating with nickel, electroless nickel plating is not included in the electroplating process. Of course, there is also a requirement for raw materials for nickel-free plating of hardware products. If raw materials contain “nickel”, they cannot be nickel-free.

3, commonly used plating colors are: green bronze, black bronze, red bronze, nickel, matt nickel, black nickel, light black nickel, deep black nickel and so on.

Second, spray paint (injection). In addition to the spray can be assigned any color, there are differences in the brightness of light oil, semi-glossy oil, matte oil. Spray transparent oil commonly known as spurt frame oil, mainly for anti-acid treatment or surface protection. Grease means that after the injection of oil, the protruding part of the surface is wiped off.

Third, the button must use a matching mold. The button used in the production of buttons is a tailor-made mold, so the buttons must also be tailor-made for the button. It is not recommended to use buttons from other manufacturers; because buttons produced by many manufacturers may look similar, but Different effects are produced. Buttons produced by molds of different manufacturers are different. When a button product is used, it is not necessary to use other channels.

Want to learn more about buttons: accessible

For more details, please pay attention to WeChat public number:

Peach Skin Shirt

SHAOXING GUANGQI TRADING CO.,LTD , https://www.sxgqtrading.com