![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
[China Glass Network] Even if there are various promotional activities of the merchants, the price of the whole car sticker glass film is still not cheap, and the owner naturally hopes that the glass film can adhere to the service life, instead of being opened for 1, 2 or even half a year. Various kinds of blistering and peeling.
In addition to the quality of the film itself, whether the film master's craft is fine, whether the car owner pays attention to the maintenance after a period of time, the impact on the life of the glass film is also great.
Inferior glass film peeled off in advance 1. Try to keep the interior of the car dry in the first few days after picking up the car.
Try to keep the inside of the car dry within three days after the film is applied, so as not to cause the film to fall off if the moisture is not dry. The rear window defogging line should not be opened as much as possible within one week. If the moisture is not dry, it will easily cause adverse effects on the demisting line.
In addition, after a filming, it will be found that there is misty water vapor inside. This is the normal phenomenon of the solar film during the dry process, and it will slowly disappear after a while.
2, try to avoid lifting windows in the days after filming
The reason is very simple. Frequent lifting of the window at this stage tends to cause the edge of the glass film to rise.
Of course, the high-quality glass film and the first-class construction, the glass film is not so easy to lift. Generally speaking, a high-performance resin glue is used between the high-grade glass film layers, and the adhesion is very excellent. When the film is applied, the edge of the film and the edge of the glass are only 2 mm, which is not easy to be sharpened, and also has scratch resistance. Injury coating with strong scratch resistance.
But after all, it is just the first few days of filming, a little attention, can greatly reduce the probability of rework.
If it is a poor quality glass film, it is likely to open the window several times, it will be tilted up ... is also a way to distinguish the quality of the glass film.
What should I do if the glass film is loose?
Unless it is very violent in the first few days of the film, the solar film will not be so easy to loosen. Of course, in the event of a loosening situation, return to the beauty shop of the film to let them rework.
How to clean the glass film in peacetime?
Sometimes there are some small stains on the glass film, the owner is naturally reluctant to go to the car wash, and the stains are unsightly in the conspicuous place. At this time, you can use the wet towel, paper towel or cotton cloth to clean the detergent. For cleaning, you can also clean it with a rubber wiper.
But don't use chemical solvents or other tools that might scratch the glass.
The glass film is also expected to have a factory life. It is inevitable that "the end of life is dead", but reasonable use and proper maintenance will not cause the film to blister and peel off easily in your car.
Later, although the maintenance is very important, the quality of the glass film itself and the level of the film master are also very, very important. When you are filming, you should choose a reliable beauty shop and brand.
　　
Rayon Print,Rayon 45S Print,Rayon 3266 Print,Rayon Fabric Digital Printing
Shaoxing Shangda Textile Co., Ltd , https://www.shangdatex.com